18
adjusted by turning the crank levers accordingly, then we lock the screws again in the new
harrow position.
Manual
EASY FLOW
6.5. Road transport
Each time, before the machine is expected to be transported on public roads, the machine
must be properly prepared. To do this, we perform the following actions:
• Using the hydraulic system, we fold the machine arms to an upright position and secure
them mechanically, using a cable controlled pin;
• Disconnect the hydraulic hoses from the tractor and place them in the appropriate sockets;
• At the front of the tractor, we attach appropriate weights with a weight appropriate to
maintain maneuverability on the road;
• We mount on the brackets located on the aggregate plates distinguishing slow moving
vehicles and portable light and warning devices. A device containing two warning signs with
white position lamps and white reflectors towards the front and two plates with group lamps
and red reflectors towards the rear shall be used.
During transport, the aggregate should be raised to such a height that the clearance under the
aggregate is about 30cm. Transport speed must not exceed 15 km / h.
Moving on public roads without traffic signs and lighting required by traffic regulations
may cause an accident.
Light and warning devices are not the equipment of aggregates. The user can buy them
at points of sale of agricultural machinery.
7. Technical characteristic
Figure 5. Technical characteristic
