21
7. OPERATION
7-1 Pre-service check
Check the items described below before commencing operation.
If any problem is found, take corrective measures by referring to “8-2 Troubleshooting” on
page 46.
7-1-1 Safety check (before power ON)
z
z
z
z
z
To prevent accidents and injury, be sure to check the following items before
commencing operation.
(1) Are all warning indications legible?
(See “1-4 Description of warning labels attached to the machine” on page 3 of the
provided CABINET Operation Manual.)
(2) Are all level adjusters adjusted properly so that the machine is not wobbly?
(See P. 23 “5-3 Adjusting the level adjusters.”)
(3) Is the play zone established as specified?
(See P. 12 “5-1-2 Play zone of installed machine.”)
(4) Is the power cord routed properly so that players and other people will not trip over
the cable?
Check the following items after turning on the power switches. If any abnormality is found,
turn off the power switch immediately and stop operating the machine. Then, unplug the
power cord from the AC power outlet and contact your distributor.
(5) Is any part of the power cord or plug abnormally hot?
(6) Does touching the machine give an electrical shock?
(7) Is there a burning smell, abnormal noise or vibration?
(8) Is there any other sign of abnormality or malfunction?
7-1-2 Function check (after power ON)
(1) Sound check (Check that sound is produced by all speakers.)
(See P. 28 “7-4-4 Sound test (SOUND TEST).”)
(2) Fluorescent lamp check (Check that the lamp lights.)
(3) Display check (Check that the LCD monitor displays images.)
(See P. 27 “7-4-3 Display test.”)
(4) Does card reader/writer operate properly?
(See P. 32 “7-4-7 Card reader/writer test.”)
WARNING