NAMCO TEKKEN 4, Connections And Ajustments

Page: 15 / 28

Page 15
6. ADJUSTMENTS AND SETTINGS
The Game PC Board Assy is fitted with 4 Option Switches.
The JAMMA (B) PCB has the Volume Control fitted.
6-1 Option Switches
NO
OFF
ON
2 3 4 1
Option Switches
Volume Control
JAMMA (B) PCB
Switch 1 is used to change between Test Mode and Game Mode.
ON: Test Mode OFF: Game Mode
Switch 2 is used to set the output level of the video signal.
31kHz ON: 0.7V p-p OFF: 0.7V p-p
15kHz ON: 3.0V p-p OFF: 0.7v P-P
Switch 3 is used to change the monitor Sync Frequency
ON: 31kHz OFF: 15kHz
Note: When using a 31kHz monitor, set the RGB input of the monitor to 0.7v. If the
monitor does not have a setting adjustment, refer to page 17 section 6-2-1
“Display Test”, and change the Contrast and RGB Brightness levels to adjust
the brightness.
Switch 4 is used to set the Video Sync Signal
ON: Composite Sync OFF: Seperate Sync