NAMCO TEKKEN 4, Connections And Ajustments

Page: 17 / 28

Page 17
DISPLAY TEST
Color bar
Overall contrast
Brightness (red)
Brightness (green)
Brightness (blue)
Reset Colour Edit values to factory defaults
Colour Edit ON /OFF
Select next test pattern
Return to test menu screen
Color bar (white)
Color bar (red)
Color bar (green)
Color bar (blue)
P r e v i o u s C o l o r
EXIT color edit
NEXT
EXIT
: P1-Button4
: P1-Button3
: P1-Button1
: P1-Start
Contrast
Bright R
Bright G
Bright B : OO
: OO
: OO
: OO
Colour Edit ON /OFF
Select to next test pattern
Return test menu screen
Color bar (white)
Color bar (red)
Color bar (green)
Color bar (blue)
DISPLAY TEST
Color bar
ENTER color edit
NEXT
EXIT
: P1-Button3
: P1-Button1
: P1-Start
6-2-1 Display Test
This test allows the following checks and adjustments to be made.
n
Colour Edit
Adjust contrast and brightness of each colour to match video output from the
PCB to the Monitor.
Note: This adjustment should only be made if the correct picture quality cannot
be achieved by using the normal monitor adjustments.
n
Convergence
Check and adjust the size, position and distortion of the screen image.
n
Interlace Check
Switches between interlaced and non-interlaced display. (Only with 15kHz video
signal).
1. Select display Test from the Test Menu Screen, the following screen is displayed.
2. Each time the 1P Button 3 is pressed the Colour Edit adjustment box is turned
ON or OFF.
3. Press the 1P Button 1 to step to the next test function
COLOUR BAR CONVERGENCE INTERLACE