1. INSTALLATION
Notes on installation
DANGER:
NEVER turn the power to the machine ON until installation has been
completed.
DANGER:
In order to avoid injury or damage to the machine due to mis-operation,
ensure that the voltage of the mains in supply is 220-240volt AC. Also,
in order to prevent possible electric shocks, be sure that the machine is
connected to the mains in supply with a securely connected earthed
plug.
NOTE:
When installing the machine, in order to maintain customer safety, be
sure to attach the supplied rear fence and safety warning mats.
NOTE:
In order to prevent customer injury when the machine is being played,
make sure that the space between the side of the machine and a wall
or other machine is at least 30cm.
NOTE:
In order that the PCB rack or power supply can be removed for service,
make sure that the rear of the machine is separated from a wall or other
machine by a distance of at least 50cm.
[NOTE]
The shipping brackets that are removed during installation will be required
to be refitted for moving, shipping, and for maintenance when the drive
castor is worn. They should be stored safely and not lost or thrown away.
Page
1
