![background image](http://html2.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_installation-and-commissioning-manual_3156099031.webp)
Page
26
1)
Remove six security screws (M5x20) and remove the rear cover.
2)
Remove two security screws (M5x20), four security screws (M5x40), and remove
the top cover plate.
3)
Loosen the hex head screws on the top joint section, slide the sleeve along the
shaft and disconnect the joint.
4)
Disconnect the bottom joint section as follows:
a)
Remove six security screws (M6x25), and remove the joint cover.
b)
Remove two hex head bolts (M10x30).
5)
Slide the upper seat assembly a little to the back, then lift and separate it from
the seat base assembly.