Page
8)
Insert the front rubber brackets (L), (R) of the tower unit in the side panel of the
seat assembly, and fasten them with two security screws (M5x16) and two
No6X½" pozi flange head screws.
9)
Remove the five security screws (M5x16) from the tower side support.
10) Fit the rear safety rubbers to the tower unit with the retaining bracket and the five
security screws (M5x16) previously removed from the tower side support.
11) Place the left, centre, and right safety warning mats in their correct positions.
12) When the machine is in its final location, lower the level adjusters (17 adjusters)
with a spanner so that all castors are raised from the floor.
13) Tighten the lock nuts with a spanner to ensure that the level adjusters not move.
5