nama SJ200, Manual

Page: 22 / 80

20
HOW TO DISASSEMBLE AND CLEAN
* After the product stops operating completely,
unplug the power cord with your dry hands.
The motor is still slowing down after the
appliance is turned off, so wait about 3 seconds
before separating the chamber.
01. SEPARATE CHAMBER SET FROM BASE.
TURN HOPPER COUNTERCLOCKWISE SO
THE GUIDE MARK IS ALIGNED WITH UNLOCK
SYMBOL ON CHAMBER TO OPEN AND PULL
OFF PARTS IN ORDER.
02. WASH PARTS UNDER RUNNING WATER
WITH CLEANING BRUSH.
03. WASH CHAMBER WITH PULP OUTLET COVER
AND JUICE CAP WIDE OPEN.
04. WIPE BASE WITH A DRY TOWEL OR SOFT
CLOTH.
05. FOR SILICONE GASKETS, YOU CAN DETACH
AND WASH THEM FOR DEEP CLEANING.
06. YOU CAN STERILIZE AND CLEAN THE
PRODUCT BY SOAKING THE PARTS IN WARM
WATER DILUTED WITH ABOUT 3.5 OZ. (100
G) BAKING SODA AND/OR 3.5 OZ. (100 G)
CITRIC ACID FOR ABOUT 30 MINUTES OR
OVERNIGHT MORE THAN 12 HOURS FOR
DEEPER CLEANING. YOU CAN ALSO TRY
TO USE A 50% VINEGAR AND 50% WARM
WATER SOLUTION WITH BAKING SODA
AND/OR CITRIC ACID.
* Be sure to clean and air dry the appliance
completely after use and store it at a clean
place. Failure to clean the product right after
use can cause its stainless steel components
and other parts to corrode or discolor due to
salt and pulp of the ingredients. In addition,
contaminants may dry up and get stuck inside
the product, making disassembly or cleaning
difficult or adversely affecting the product's
performance. For long-term storage, clean
the appliance with the cleaning brush in
advance. Do not clean the product with boiling
water or subject it to high temperature. Do
not use abrasive cleaning tool like kitchen sink
cleaner, or stainless-steel sponge. Do not use
a dishwasher or dish dryer for the product.
SJ200_NAMA_MANUAL_Tri-lingual_FINAL_UPDATED_06_04_21.indd 20 6/3/21 11:25 PM