nama SJ200, Manual

Page: 18 / 80

16
CONTROL KNOB
Ensure the control knob is on the OFF position prior to plugging in
power cord to power outlet.
[ OFF ]
POSITION
Stops the operation of
the product.
(Note: When the machine
is running and then it is
switched to OFF, it will take
3 seconds for the machine
to come to a complete
stop.)
[ ON ]
POSITION
Starts the motor and
makes juice.
[ REV ]
POSITION
Turn and hold the knob
to REV if the juicer stops
due to a jam.
(Note: Hold the knob to REV
for 15 seconds after juicing is
completed. This will relieve
pressure in the chamber and
be easier to disassemble.)
Using the Control Knob if the juicer stops working.
STEP 1
Turn the control knob to [REV] and hold for 3-5 seconds and
release the knob. Repeat this 2-3 times. [REV] rotates the auger
in reverse direction to push the ingredients backwards to help
dislodge any ingredients that are stuck.
STEP 2
After you release the knob from [REV] and the machine stops
completely, turn the knob to [ON] to start juicing again. If the
juicer does not work after these steps, unplug the juicer, and
disassemble and clean the parts before operating the juicer again.
SJ200_NAMA_MANUAL_Tri-lingual_FINAL_UPDATED_06_04_21.indd 16 6/3/21 11:25 PM