3
1
2
3
9
8
5
6 7
RETURN
TO POOL
FROM
SKIMMER BOX
4
6
7
8
9
TYPICAL SYSTEM INSTALLATION
We DO NOT recommend the use of valves on the inlet or outlet of the Cell
Housing. If you do use a valve then it is important to ensure that the valve cannot
deadhead (lock closed) while the pump is running. It is the installer’s
responsibility to ensure some form of flow control is installed in this instance and
it disables the pump.
ALWAYS ensure that pipe work and equipment do not allow gases generated to
collect and build up in any part of the installation.
DO NOT apply priming fluid to the Cell Housing, it is not needed and may react
with the plastic.
Before you start:
Indicates direction of water flow
1
2
3
4
5
Filter
Heater
Pump
Control Unit with Weather Shield
OXI & ION Cell Housing
ION Cable
OXI Cable
Pump mains power cable
Control Unit mains power cable
