1
Specifications subject to change without notice.
The contents of this manual are the exclusive copyright of Naked Pools and may not be reproduced without written
permission.
©
2020
Whilst every care was taken in preparation of this document, Naked Pools accepts no responsibility for the accuracy of the
information supplied.
This guide contains important information about the installation, operation and safe use of
this product. When installing and using this electrical equipment, basic safety precautions
should always be followed. Failure to follow safety warnings and instructions in this manual
can result in serious injury and/or damage to the equipment. Read and follow all warning
notices and instructions that are included in this guide.
The Control Unit internally contains live components. There is a danger of electric shock if
opened. If the power cord is damaged then the manufacturer, their agent or a similar
qualified person in order to avoid a hazard, should replace it. The product shall be installed
according to AS/NZS 3000 wiring rules. It shall be installed outside the pool zone.
To reduce the risk of accidents or incidents, service on the unit should only be performed
by a qualified pool service professional and not operated by children under 18 years of age.
To reduce the risk of personal injury, the Control Unit is designed so that the OXI Cell
and ION Rods will only receive power when the pool pump is on. Otherwise possible
gas build-up can occur. If the pump is not installed to the AC Socket (pump outlet) on
the Control Unit, the installer MUST ensure that the OXI Cell and ION Rods are never
energised when the pool pump is OFF or water is not flowing through the unit.
IMPORTANT - PLEASE READ!
WHEN MIXING ACID WITH WATER:
ALWAYS ADD ACID TO WATER. NEVER ADD WATER TO ACID.
DO NOT PLUG UNIT IN IF CARTON HAS BEEN WET.
GAS BUILD-UP CAN OCCUR WITH IMPROPER WIRING.
