background image

 Safety instructions

General comments

Read 

the 

operating 

instructions 

carefully. 

Familiarise  yourself  with  the  correct  operation  of 
the mower.

Keep  the  operating  instructions  for  later  use  and 
for subsequent owners.

Follow  the  safety  instructions  and  warnings  on 
the mower.

Users

Children  and  juveniles  under  the  age  of  16  as 
well  as  anyone  who  has  not  read  the  operating 
instructions  must  not  operate  the  mower.  Local 
regulations may specify the minimum age.

Wear long, close-fitting trousers and sturdy, non-
slip footwear.

Working area

Carefully  check  the  whole  area  to  be  mown. 
Remove  all  foreign  objects,  such  as  stones, 
sticks, wires, bones, etc.

Do  not  use  the  mower  if  there  are  any  persons 
(caution:  children)  or  animals  (including  wildlife) 
in the working area.

Operating times

Comply  with  any  national  regulations  regarding 
operating  times  for  lawn  mowers  (noise 
prevention).

 

See the operating manual for operating times.

 

Use  the  mower  only  in  daylight  or  if  the  working 
area is well illuminated.

Operation

Always  make  a  visual  inspection  of  the  mower 
before  using  it.  The  mower  must  be  in  a  safe 
operating condition.

Damaged  or  worn  parts  must  be  replaced 
immediately.

Use  the  mower  only  if  it  is  in  the  technical 
condition stipulated by the manufacturer.

The  person  using  the  mower  is  responsible  for 
any  accidents  involving  other  persons  or  their 
property.

Do not disable the safety or protective devices on 
the mower.

Do  not  start  the  engine  if  anyone  is  standing  in 
front  of  the  cutter  bar 

–  the  cutter  and  wheel 

drives must not be engaged.

Use the mower on grassy areas only.

The  cutter  drive  must  be  disengaged  when  the 
mower is not on a mowable surface.

The  blade  guard  must  be  mounted  on  the  cutter 
bar if the mower is transported or lifted.

Keep hands and feet away from rotating parts.

Never  lift  or  carry  the  mower  if  the  engine  is 
running.  Wait  until  the  cutters  have  stopped 
moving, then pull off the spark plug connector.

The  mower  may  only  be  used  if  the  safety 
clearance  determined  by  the  handlebar  is 
maintained.

Ensure that you have a secure footing.

Always mow across a slope.
Never mow up or down a slope or on slopes with 
an inclination greater than 10°.

Keep  the  exhaust  and  engine  free  of  leaves, 
grass and spilt oil.

Do  not  leave  the  mower  unsupervised 

–  pull  off 

the spark plug connector.

Warning!
Petrol is highly flammable!

Store petrol in designated containers only.

Refill  with  petrol  outdoors  only.  Do  not  smoke 
while refilling!

Do not open the tank cap or refill with petrol while 
the engine is running or if the machine is hot.

Use  a  funnel  or  filling  tube  to  refill  petrol  to 
prevent  fuel  being  spilt  onto  the  engine,  the 
housing or on the ground.

If  petrol  has  been  spilt,  do  not  start  the  engine. 
Clean  the  mower  and  do  not  restart  the  engine 
until the petrol vapours have dispersed.

Summary of Contents for SM8700

















Reviews: