Nakayama PRO PM4810, Manual

Page: 21 / 80

Variable speed Lever
^ƉĞĞĚĐĂŶďĞĂĚũƵƐƚĞĚĨƌŽŵϮ͘ϳʹϱ͘ϬŬŵͬŚǁŚŝůĞĚƌŝǀŝŶŐ͘ĐƟǀĂƚĞƚŚĞƌŝŐŚƚŚĂŶĚůĞŽŶƚŚĞĚĂƐŚďŽĂƌĚĂŶĚƐĞƚŝŶŽŶĞŽĨƚŚĞϰĚŝīĞƌĞŶƚƐƉĞĞĚƐ͘tŚĞŶĚƌŝǀŝŶŐŝŶ
ŽŶĞƚŚĞƚǁŽůŽǁĞƐƚƐƉĞĞĚƐƚŚĞƉĂĐĞĚŝīĞƌĞŶĐĞǁŝůůŶŽƚǀĂƌLJƐŝŐŶŝĮĐĂŶƚůLJ͘
ΎEŽƚĞ͗EŽƚĂůůŵŽĚĞůƐŚĂǀĞƚŚŝƐdŚƌŽƩůĞůĞǀĞƌ͘
Stop Engine
DŽǀĞƚŚĞƚŚƌŽƩůĞůĞǀĞƌƚŽƚŚĞ͞^>Kt͟ƉŽƐŝƟŽŶ͘
ΎEŽƚĞ͗EŽƚĂůůŵŽĚĞůƐŚĂǀĞƚŚŝƐdŚƌŽƩůĞůĞǀĞƌ͘
• Release the clutch lever.
• Release the brake lever.
tĂƌŶŝŶŐ͊dŚĞďůĂĚĞǁŝůůĐŽŶƟŶƵĞƚŽƌŽƚĂƚĞĨŽƌĂĨĞǁƐĞĐŽŶĚƐĂŌĞƌƚŚĞĞŶŐŝŶĞŚĂƐƐƚŽƉƉĞĚ͘ŝƐĐŽŶŶĞĐƚƚŚĞƐƉĂƌŬƉůƵŐĐĂƉŝĨƚŚĞůĂǁŶŵŽǁĞƌŝƐƚŽďĞůĞŌ
ƵŶĂƩĞŶĚĞĚ͘
Maintenance
/DWKZdEdZĞŐƵůĂƌ͕ĐĂƌĞĨƵůŵĂŝŶƚĞŶĂŶĐĞŝƐĞƐƐĞŶƟĂůĨŽƌŬĞĞƉŝŶŐƚŚĞƐĂĨĞƚLJůĞǀĞůĂŶĚŽƌŝŐŝŶĂůƉĞƌĨŽƌŵĂŶĐĞŽĨƚŚĞŵĂĐŚŝŶĞƵŶĐŚĂŶŐĞĚŝŶƟŵĞ͘
ͻ<ĞĞƉĂůůŶƵƚƐ͕ďŽůƚƐĂŶĚƐĐƌĞǁƐƟŐŚƚƚŽďĞƐƵƌĞƚŚĞĞƋƵŝƉŵĞŶƚŝƐŝŶƐĂĨĞǁŽƌŬŝŶŐĐŽŶĚŝƟŽŶ͘ZĞŐƵůĂƌŵĂŝŶƚĞŶĂŶĐĞŝƐĞƐƐĞŶƟĂůĨŽƌƐĂĨĞƚLJĂŶĚƉĞƌĨŽƌŵĂŶĐĞ͘
ͻEĞǀĞƌƐƚŽƌĞƚŚĞĞƋƵŝƉŵĞŶƚǁŝƚŚĨƵĞůŝŶƚŚĞƚĂŶŬŝŶƐŝĚĞĂďƵŝůĚŝŶŐǁŚĞƌĞǀĂƉŽƵƌŵĂLJƌĞĂĐŚĂŇĂŵĞŽƌĂƐƉĂƌŬŽƌĂƐŽƵƌĐĞŽĨĞdžƚƌĞŵĞŚĞĂƚ͘
• Allow the engine to cool before storing in an enclosed space.
ͻdŽƌĞĚƵĐĞƚŚĞĮƌĞŚĂnjĂƌĚ͕ŬĞĞƉƚŚĞĞŶŐŝŶĞ͕ĞdžŚĂƵƐƚƐŝůĞŶĐĞƌ͕ďĂƩĞƌLJĐŽŵƉĂƌƚŵĞŶƚĂŶĚĨƵĞůƐƚŽƌĂŐĞĂƌĞĂĨƌĞĞŽĨŐƌĂƐƐ͕ůĞĂǀĞƐ͕ŽƌĞdžĐĞƐƐŝǀĞŐƌĞĂƐĞ͘ŽŶŽƚ
ůĞĂǀĞĐŽŶƚĂŝŶĞƌƐǁŝƚŚŐƌĂƐƐĐƵƫŶŐƐŝŶƌŽŽŵƐ͘
ͻ&ŽƌƌĞĂƐŽŶƐŽĨƐĂĨĞƚLJ͕ĚŽŶŽƚƵƐĞƚŚĞĞƋƵŝƉŵĞŶƚǁŝƚŚǁŽƌŶŽƌĚĂŵĂŐĞĚƉĂƌƚƐ͘WĂƌƚƐĂƌĞƚŽďĞƌĞƉůĂĐĞĚĂŶĚŶŽƚƌĞƉĂŝƌĞĚ͘hƐĞŐĞŶƵŝŶĞƐƉĂƌĞƉĂƌƚƐ;ďůĂĚĞƐ
ƐŚŽƵůĚĂůǁĂLJƐďĞĂƌƚŚĞƐLJŵďŽůͿ͘WĂƌƚƐƚŚĂƚĂƌĞŶŽƚŽĨƚŚĞƐĂŵĞƋƵĂůŝƚLJĐĂŶĚĂŵĂŐĞƚŚĞĞƋƵŝƉŵĞŶƚĂŶĚďĞĚĂŶŐĞƌŽƵƐĨŽƌLJŽƵƌƐĂĨĞƚLJ͘
• If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
• Wear strong work gloves when removing and reassembling the blade.
ͻŚĞĐŬƚŚĞďůĂĚĞ͛ƐďĂůĂŶĐĞĂŌĞƌƐŚĂƌƉĞŶŝŶŐ͘
ͻŚĞĐŬƚŚĞƐĞůĨͲĐůŽƐŝŶŐŐƵĂƌĚĂŶĚŐƌĂƐƐͲĐĂƚĐŚĞƌĨƌĞƋƵĞŶƚůLJĨŽƌǁĞĂƌĂŶĚĚĞƚĞƌŝŽƌĂƟŽŶ͘
ͻtŚĞŶĞǀĞƌƚŚĞŵĂĐŚŝŶĞŝƐƚŽďĞŚĂŶĚůĞĚ͕ƚƌĂŶƐƉŽƌƚĞĚŽƌƟůƚĞĚLJŽƵŵƵƐƚ͗
ͲtĞĂƌƐƚƌŽŶŐǁŽƌŬŝŶŐŐůŽǀĞƐ͖
Ͳ'ƌĂƐƉƚŚĞŵĂĐŚŝŶĞĂƚƚŚĞƉŽŝŶƚƐƚŚĂƚŽīĞƌĂƐĂĨĞŐƌŝƉ͕ƚĂŬŝŶŐĂĐĐŽƵŶƚŽĨƚŚĞǁĞŝŐŚƚĂŶĚŝƚƐĚŝƐƚƌŝďƵƟŽŶ͘
Blade
/ŶƐƉĞĐƟŽŶ
ͻdŝůƚƚŚĞŵŽǁĞƌƚŽƚŚĞƌŝŐŚƚ͕ƐŽƚŚĞĂŝƌĐůĞĂŶĞƌƐŝĚĞŝƐƵƉ͘dŚŝƐǁŝůůŚĞůƉƚŽƉƌĞǀĞŶƚĨƵĞůůĞĂŬĂŐĞĂŶĚŚĂƌĚƐƚĂƌƟŶŐ͘
• Inspect the blade for damage, cracks and excessive rust or corrosion.
A dull blade can be sharpened, but a blade that is excessively worn, bent, cracked, or otherwise damaged must be replaced.
ͻƚŽƌƋƵĞǁƌĞŶĐŚŵƵƐƚĂůǁĂLJƐďĞƵƐĞĚǁŚĞŶŝŶƐƚĂůůŝŶŐƚŚĞďůĂĚĞ͘
ŚĞĐŬƚŚĂƚƚŚĞďůĂĚĞďŽůƚƐĂƌĞƟŐŚƚ͘
ZĞŵŽǀĂůĂŶĚŝŶƐƚĂůůĂƟŽŶ;WŝĐƚƵƌĞYͿ
/ĨLJŽƵƌĞŵŽǀĞƚŚĞďůĂĚĞĨŽƌƐŚĂƌƉĞŶŝŶŐŽƌƌĞƉůĂĐĞŵĞŶƚ͕LJŽƵǁŝůůŶĞĞĚĂƚŽƌƋƵĞǁƌĞŶĐŚĨŽƌŝŶƐƚĂůůĂƟŽŶ͘tĞĂƌŚĞĂǀLJŐůŽǀĞƐƚŽƉƌŽƚĞĐƚLJŽƵƌŚĂŶĚƐ͘
ͻZĞŵŽǀĞƚŚĞďŽůƚǁŝƚŚĂƐŽĐŬĞƚǁƌĞŶĐŚ͘hƐĞĂǁŽŽĚĞŶďůŽĐŬƚŽƉƌĞǀĞŶƚƚŚĞďůĂĚĞĨƌŽŵƚƵƌŶŝŶŐǁŚĞŶƌĞŵŽǀŝŶŐƚŚĞďŽůƚ͘dŚĞŶƌĞŵŽǀĞƚŚĞďůĂĚĞ͘
• Install the blade using the blade bolt and special washers. Be sure to install the special washers with the concave side toward the blade and the convex side
toward the bolt.
ͻdŝŐŚƚĞŶƚŚĞďůĂĚĞďŽůƚǁŝƚŚĂƚŽƌƋƵĞǁƌĞŶĐŚ͘hƐĞĂǁŽŽĚĞŶďůŽĐŬƚŽƉƌĞǀĞŶƚƚŚĞďůĂĚĞĨƌŽŵƚƵƌŶŝŶŐǁŚĞŶƟŐŚƚĞŶŝŶŐƚŚĞďŽůƚ͘
'ƌĂƐƐĂŐůĞĂŶŝŶŐĂŶĚZĞƉůĂĐĞŵĞŶƚ;WŝĐƚƵƌĞZͿ
Cleaning
tĂƐŚƚŚĞďĂŐǁŝƚŚĂŐĂƌĚĞŶŚŽƐĞ͕ĂŶĚĂůůŽǁŝƚƚŽĚƌLJĐŽŵƉůĞƚĞůLJďĞĨŽƌĞƵƐĞ͖ĂǁĞƚďĂŐǁŝůůĐůŽŐƋƵŝĐŬůLJ͘
ZĞƉůĂĐĞŵĞŶƚ
ͻhŶĐůŝƉƚŚĞƉůĂƐƟĐĞĚŐĞƐŽĨƚŚĞďĂŐĨƌŽŵƚŚĞĨƌĂŵĞ͕ƌĞŵŽǀĞƚŚĞďĂŐĨƌŽŵƚŚĞƵƉƉĞƌĐŽǀĞƌ͘
ͻ/ŶƐĞƌƚƚŚĞĨĂďƌŝĐďĂŐŝŶƚŽƚŚĞƵƉƉĞƌĐŽǀĞƌ͕ĐůŝƉƚŚĞƉůĂƐƟĐĞĚŐĞƐŽĨƚŚĞďĂŐŽŶƚŽƚŚĞĨƌĂŵĞ͘
Water Nozzle (Picture R2)
ͻdŚĞůĞŌƐŝĚĞŽĨƚŚĞŵŽǁĞƌĚĞĐŬŝƐĮƩĞĚǁŝƚŚĂǁĂƚĞƌŶŽnjnjůĞĨŽƌǁĂƐŚŝŶŐƚŚĞĚĞĐŬ͘
ͻtŚĞŶƵƐŝŶŐƚŚĞǁĂƚĞƌŶŽnjnjůĞ͕ƚŚĞŵĂĐŚŝŶĞŵƵƐƚďĞŝŶƚŚĞůŽǁĞƐƚŚĞŝŐŚƚƉŽƐŝƟŽŶĂŶĚƉůĂĐĞĚŽŶƚŚĞůĂǁŶ͘dŚŝƐĞŶƐƵƌĞƐƚŚĂƚƚŚĞǁĂƚĞƌƌĞŵĂŝŶƐƵŶĚĞƌƚŚĞ
deck during cleaning.
ͻƩĂĐŚĂŚŽƐĞƚŽƚŚĞŶŽnjnjůĞ͘
• Turn on the water and start the engine.
ͻdŚĞƌŽƚĂƟŽŶƐŽĨƚŚĞďůĂĚĞƐǁŝůůĞŶƐƵƌĞƚŚĂƚƚŚĞǁĂƚĞƌǁŝůůĐůĞĂŶƚŚĞƵŶĚĞƌƐŝĚĞŽĨƚŚĞĚĞĐŬ͘
EŽƚĞ͗EŽƚĂůůŵŽĚĞůƐŚĂǀĞǁĂƚĞƌŶŽnjnjůĞ͘
888/*,0-"06500-4(3
Ϯϭ