- 3 -
3. SYMBOLS ON THE MACHINE
For safe operation and maintenance, symbols are carved in relief on the machine.
Please follow these instructions and be careful to not make a mistake.
(a).The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
(b).The direction to close the choke
Position: AIR CLEANER COVER
(c).The direction to open the choke
Position: AIR CLEANER COVER.
4. SAFETY PRECAUTIONS
•
BEFORE USING THE MACHINE
a. Read this owner’s manual carefully to understand how to
operate this unit properly.
b. This product has been designed for use in cutting grass,
and it should never be used for any other purpose.
c. You should never use this brush cutter when under the
influence of alcohol, when suffering from exhaustion or lack
of sleep when suffering from drowsiness as a result of
having taken cold medicine, or at any other time when a
possibility exists that your judgment might be impaired or
that you might not be able to operate the brush cutter
properly and in a safe manner.
d. Avoid running the engine indoors. The exhaust gases
contain harmful carbon monoxide.
e. Never use your brush cutter under circumstances like
those described below:
1.When the ground is slippery and when other conditions
exist which might make it not possible to maintain a
steady stance while using the brush cutter.
2. At night, at times of heavy fog, or at any other times
when your field of vision might be limited and it would
be difficult to gain a clear view of the area.
3. During rain storms, lightning storms, at times of
strong or gale-force winds, or any other time when weather conditions might make it
unsafe to use this product.
f. Lack of sleep, tiredness, or physical exhaustion results in shorter attentions spans,
and this in turn can lead to accidents and injury. Limit the amount of time the brush
cutter is to be used continuously to approximately 30-40 minutes per session, and
Summary of Contents for PB6500
