background image

Page 11 of 14

Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.

4/21  IOM-MAC-700-INST

Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.

BIPOLAR IONIZATION - GPS-FC24-AC 

INTRODUCTION:

Needlepoint Bipolar Ionization (NPBI) technology cleans indoor air. This technology produces a high concentration of positive 

and negative ions, delivering them to the space via the MAC-700. Within the air stream, ions attach to particles, where they 

combine, become larger and are more easily filtered from the air. When ions come in contact with pathogens, they disrupt the 

pathogens’ surface proteins, rendering them inactive. The technology delivers indoor air that’s free of ozone and other harmful 

by-products.  

PRODUCT DESCRIPTION:

This device is an auto-cleaning device handles up 2400 CFM and doesn’t require maintenance with multiple mounting options.

STANDARD FEATURES INCLUDE:

•  Universal Voltage Input
•  In-Line ON/OFF Switch 
•  Magnets for ease of installation
•  Replaceable Carbon Fiber Brush Emitters 
•  Programmable auto-cleaning cycle
•  Operation Status LED 
•  Building automation system alarm contacts 

SPECIFICATION:

Input Voltage

24 V to 240 V AC/DC

Amps-Operating

0.17 – 0.017 A

Amps-Cleaning

0.33 – 0.03 A

Power consumption

8 Watts

Frequency

50/60 HZ

Airflow Capacity

0 – 2400 CFM or up to 6 tons

Temperature Range 

-20°F to 200°F

Humidity Range

0 – 100% RH

Total Ion Output

>300 Million ion/cc

Unit Dimension

7.9" L x 1.1" W x 5" H

Weight 

1.5 lb.

Summary of Contents for MAC-700















Reviews: