Page 18 Instruction manual 55034XXX Version 1 March-04
Do not press the display or any key with a pointed object such as a ballpoint pen or a
screwdriver, as this may scratch or damage the key. Use your only your fingers.
Do not let objects fall on the pan in order to avoid damages to the weighing system.
Never place into the balance an object heavier than the maximum weight of the balan-
ce's range, the sensor could be damaged.
Never disconnect it by pulling the cable for security reasons.
Place the unit in a location with adequate ventilation to prevent heat build-up the unit.
Do not submerge the balance in liquids.
The balance has a schuko plug. This plug must be connected to a switch connected to
ground. This switch must be close in order to be able to disconnect it in case of emergency.
In case of damage or doubt it can be solved getting in touch with the NAHITA Technical
Service.
Cleaning
For the cleaning of the inox steam parts use always a special cloth that does not give off
fluff. Do not use any cloth that can produce damages to the equipment.
For the cleaning of the different pieces of the equipment, we highly recommend to use
neutral products that do not have a pH superior than 6 (soaped water without abrasives).
ATTENTION!!
IF AN EQUIPMENT IS NOT PROPERLY CLEAN AND DISINFECTED IT WOULD
NOT BE ALLOWED TO REPAIR BY OUR TECHNICAL SERVICE.
Version 1 March-04
Instruction manual 55034XXX Page 11
Thank you for choosing this equipment. We sincerely wish that you enjoy your electro-
nic balance NAHITA. We highly recommend looking after this equipment according to
what is stated in this manual.
NAHITA develops its products beeing remarkable in the ergonomy and security of its
user. The incorrect use of the equipment can cause accidents and electric discharges, cir-
cuit breakers, fires, damages. Please read the point of Maintenance, where we expose the
security notes.
The correct using of the equipment and its good quality will permit you to enjoy this
equipment for years.
Please bear in mind the following:
This manual should be available for all the users of these equipments
As an accuracy instrument, we should manipulate carefully avoiding the sudden move-
ments, knocks, free fall of heavy objects, manipulation of sharp objects, and the pouring
of liquids in the interior of the balance.
Never dismantle the different pieces of the balance to repair it yourself, since it could
produce a defective use of the whole equipment and a loss of the product warranty.
To prevent fire or shock hazard, do not expose the balance to rain or humid environ-
ments.
If you have any doubt do not hesitate in contacting your distributor or our NAHITA
Technical Assistant Department by email [email protected], by telephone 34
948310513 or by fax 34 948310500 or 948312071.
Please do not forget filling the Warranty Certificate and send it before 15 days after the
date of purchase.
ATTENTION!!
IF AN EQUIPMENT IS NOT PROPERLY CLEAN AND DISINFECTED IT WOULD
NOT BE ALLOWED TO REPAIR BY OUR TECHNICAL SERVICE.
INDEX OF CONTENTS
1. APPLICATIONS
2. DESCRIPTION
3. TECHNICAL SPECIFICATIONS
4. SETTING UP
5. FUNCTIONS OF THE BALANCE
6. MANTEINANCE AND CLEANING
7. TROUBLESHOOTING
12
12
13
13
15
17
19
TO GET THE BEST RESULTS AND HIGHER DURATION OF THE EQUIPMENT
IT IS ADVISABLE TO READ THOROUGHLY THIS MANUAL BEFORE OPERA-
TING WITH THE EQUIPMENT.
LANGUAGE INDEX
Spanish
English
French
1-10
11-19
20-28
ENGLISH
ENGLISH
