27
Nagra –
TUBE DAC
Modulometer & display intensity adjustment
This toggle switch allows you to adjust the Modulometer &
display backlight intensities. Pushing the toggle switch up will
increase the intensity, pushing it down will lower the intensity
all the way to complete extinction. There are 7 different
intensity levels.
Phase mode selection
The outputs of the TUBE DAC can be set to phase inversion
mode when you activate the PHASE switch. Pulling up the
toggle switch will activate the phase inversion. Pulling it down
will deactivate the phase inversion.
Headphones output selection
To activate the headphones output, pull down the two-way
switch to PHONES position. Pull it up to activate the output
connectors located on TUBE DAC back panel.
HEADPHONES OUTPUT
This equipment is capable of
producing high sound levels which
can be harmful to your hearing
Please, turn the volume level
control to the minimum before
pulling down the selection
switch to activate jack output
and before connecting your
headphones
OUTPUT
PHONES
PHASE