19
Nagra –
TUBE DAC
Absolute phase
You can change the absolute phase at any time while listening by pushing the
PHASE switch on front panel upward to invert the phase or downward to
remove the inversion.
A Phi symbol will appear on the right top corner of the main display when
inverted mode is active.
AES
Ø
NO SIGNAL
You may also define the default phase inside the AUDIO SETTINGS menu:
AUDIO SETTINGS
Press the Controller knob to enter
into the AUDIO SETTINGS menu
and rotate it to select OUTPUT
PHASE.
- OUTPUT PHASE -
NORMAL
By default, NORMAL is selected, as
shown here.
To change the phase, press the Controller knob and select NORMAL or REVERSE
by rotating it, then confirm by pressing once again the Controller knob, the new
desired OUTPUT PHASE is stored.