11
Nagra -
CLASSIC DAC
Operations
Basic operations
The typical Nagra front rotary selector offers 4 positions.
•
OFF is similar to a STANDBY mode.
•
R is for Remote control.
•
MUTE, the unit is ON, but the audio signal is muted.
•
ON, the unit is fully operational.
WI
TH
AC
PO
WER
WI
TH
DC
PO
WER
Rear
Mains
switch
Power
supply
output
Front
rotary
selector
Action
0
OFF
Any
The unit is totally off.
I
ON
OFF
The unit is in STANDBY mode. The device is still
powered but the consumption remains very low.
I
ON
R
The unit can be triggered ON and OFF by the IR
Remote Control Unit.
I
ON
MUTE
The unit is ON and muted (for warming-up).
I
ON
ON
The unit is fully operational.
Setting your CLASSIC DAC
Thanks to its LCD display and the controller, you will be able to set up your CLASSIC
DAC to fully integrate it within your system.
How to configure
It is simple, one knob that does everything.
You can rotate it or press it. If you rotate
the Controller, you select the desired input.
If you push on it, you set/remove the phase
inversion mode.
When the phase inversion mode is active, the character «Ø» appears in the lower right
corner of the display:
Phase inversion mode active
USB
PCM 44.1kHz Ø
