10
Nagra -
CLASSIC DAC
Front panel
1
2
3
4
5
6
1
LCD display and Modulometer backlight intensity switch, pushed up will increase
the intensity, down will reduce it, there are 7 intensity levels.
2
Nagra Modulometer indicates the digital input level in dBFS (Full Scale) of the
currently selected input. 0 dB being the maximum level. The black needle
corresponds to the signal on the left channel and the red needle to that of the
right channel.
3
LCD Display.
4
Controller knob to select the digital input and the phase inversion mode.
5
Front rotary selector.
6
IR window and remote control LED.
When turned ON, the CLASSIC DAC will go through a short preheating sequence
(around 15s). This is to optimize the warming-up of components. This will allow your
CLASSIC DAC to offer excellent performance for a longer period, since the components
are managed gently. «HEATING» appears on the display during this sequence.
Note: In case of an accidental return to the OFF position of the front rotary selector for
less than 1 second, the preheating is not reapplied.
