3. Batch setting allows up to 30 parameters to be set at the same time .
4. The setting content that conforms to the batch setting code format is made into a QR code in the
code making software, and the setting code is read for batch setting .
For example : enable setting code (command parameter : 00000000), induction mode (command
parameter : 02000003), turn on the fill light when taking pictures (command parameter : 03000000), single
code reading time -3000ms (command parameter : 0202001E), disable Read the command code of
Interleaved 2 of 5 code (command parameter : 070A0100), the content of the batch setting code is as
follows :
@WSM00000000;02000003;03000000;0202001E;070A0100;
When batch setting is required, read the completed batch setting code to complete the setting .
Note :
1. When performing batch settings, you must ensure that " setting code is turned on ";
2. If the content of the batch setting code does not conform to the setting code rules, or the setting
command parameters are not included in the parameter list that can be set, the setting will fail .
appendix
Appendix A : Data Codes
0 to 9
0 1
