** Transfer the entire Data only the Start segment
Only the End segment is transmitted, only the Center segment is transmitted
6.5.2 Data segment length modification
modify the length of the Start segment and the length of the End segment by reading the following
setting codes, combined with the " Data Code " and " Save " setting codes . Both the Start segment and the
End segment allow up to 255 characters, and both lengths are represented by one hexadecimal character .
Refer to Appendix F for the hexadecimal conversion table corresponding to characters .
Modify the length of the Start segment and modify the length of the End segment
6.6 RF Information
Read Fail (RF) information refers to the information output when the reading module fails to read, so
that users or programs can adjust or operate accordingly after detecting this information . The user can
freely define the RF information .
Read the following setting codes to enable/disable RF message transmission .
Allow sending of RF information** Disable sending of RF information
Read the following setting codes, combined with the " data code " and " save " setting codes, you can
