12700ms .
Note : The delay time setting can only be set after the " Same code reading delay " is turned on .
Unlimited delay 500ms
1000ms 3000ms 5000ms
3.3.3 Duration of a single code reading
Please refer to Section 3.1.2 for the setting of the single-time code reading time length setting code .
3.4 Induction mode
Sensing mode refers to a working mode in which the reading module enters the reading mode by
sensing the changes in the brightness of the surrounding environment . When the scene changes , the
reading module starts to read . After the reading successfully outputs the information or the single code
reading time expires, the reading module needs a certain interval (can be set) to re-enter the monitoring
state . If the following conditions do not occur, the reading module will work cyclically in the above
manner : if the barcode is not scanned within a single reading time, the reading module will automatically
suspend the reading of the code and enter the monitoring state . In the induction reading mode, the reading
module can also start reading the code after pressing the trigger button, and continue to monitor the
brightness of the surrounding environment when the code is successfully read or the trigger button is
released .