background image

SYSTEM FEATURES

U-1000 RECEIVER (Single Channel) 
and U-2000 RECEIVER (Dual Channel)

• Unsurpassed UHF performance with 120 dB dynamic range and operation up

to 500 feet line-of-sight

• Rugged 19” 1U rackmountable UHF-1000/2000 receiver with dual removable

antennas (for convenient front panel placement), 1000 user switchable UHF
frequencies and True Diversity circuitry for eliminating dropouts and
maximizing range

• Sophisticated IF filtering for multiple UHF-1000/2000 system operation in the

same location simultaneously

• Tone Squelch™ circuitry for protection from RF interference
• Front panel back-lit LCD display indicates the channel/frequency selected,

received RF and AF levels, A/B diversity status.

• Convenient UP or DOWN buttons for easy volume control.
• Front panel ON/OFF button.
• User friendly configuration menus.
• RF Scan feature measures and provides interference free channel selections.
• Download feature sends User information to the transmitters via convenient

USB connection.

• Back panel balanced XLR mic level and unbalanced 1/4” jack audio outputs,

and jacks for dual antennas

• Externally powered with 15 VDC (800 mA) AC adapter

UB-1000 and UH-1000 TRANSMITTERS

Choice of transmitters: UH-1000 handheld or UB-1000 bodypack,
both 1000-channel selectable

• UH-1000 and UB-1000 both operate on 2 AA batteries for the longest reliable

and economical battery life.

• UH-1000 handheld is a sleek, durable unit with an internal antenna system.

The powerful audio section provides maximum feedback rejection, and
minimal handling noise. 

• UB-1000 bodypack is a versatile unit with unique 3-Pin Mini XLR input

connector for instrument, lavalier mic, or headworn mic (with convenient DC
phantom powering). An input level control allows optimal audio gain
adjustment.

• Both the UH-1000 and UB-1000 transmitters feature On/OFF, Mute control,

Low battery and Mute LED, and LCD display.

• User friendly configuration menus.

3

22

ACCESSORIES

PART NUMBER                        DESCRIPTION

3008-11  ............USB cable (included w/each Rx)
3008-10  ............Audio cable 1/4” to 1/4” mono plug (included w/each Rx)
12017-50  ..........WMC-11 Rubber mic clip for handheld wireless microphone 

(included w/each UH-1000)

Adapters (one included w/each Rx)
3007-98 ..............Power Supply, 115VAC for U-1000 Rx 
3008-00 ..............Power Supply, 230VAC for U-1000 Rx 
3007-99 ..............Power Supply, 115VAC for U-2000 Rx 
3008-01 ..............Power Supply, 230VAC for U-2000 Rx 

Antennas (pair included w/each Rx)
3008-02 ..............Antenna for U-1000/2000 Rx, Band 1
3008-03 ..............Antenna for U-1000/2000 Rx, Band 2  

Bodypack Inputs (one included w/each UB-1000)
3008-08 ..............Instrument cable w/3-pin mini XLR to 1/4” male mono plug
10300-82  ..........LM-14/O Omnidirectional lavalier mic w/3-pin mini XLR
10300-83  ..........LM-14/U Unidirectional cardioid lavalier mic w/3-pin mini XLR
10300-63 ............HM-1 Headmic (TM) Unidirectional headworn mic 

w/3-pin mini XLR

10300-65  ..........HM-3 Headmic (TM) Unidirectional headworn mic 

w/3-pin mini XLR

Optional Accessories
3008-05 ..............Remote Antenna for U-1000/2000 Rx, Band 1
3008-06 ..............Remote Antenna for U-1000/2000 Rx, Band 2
3008-07 ..............AD-4U UHF Antenna Distribution System
3008-04 ..............Antenna Rack Kit for U-1000/2000 Rx
10300-14  ..........Condenser element cartridge for UH-1000
10219-90  ..........SMCC-2 Aluminum flight case for multiple mics 

and transmitters

Summary of Contents for U-1000 Series













Reviews: