background image

2

PMX SERIES

Powered Mixer with DSP Effects

Congratulations on your choice of the NADY AUDIO PMX
Series powered console mixer — you have purchased one
of the finest powered mixing units on the market today.
This unit was developed using the expertise of
professional sound engineers and working musicians. You
will find that your new PMX Series powered mixer has
superior performance and greater flexibility than any other
powered mixer in its price range. Please read this manual
carefully to get the most out of your new unit. Thanks for
selecting NADY AUDIO as your choice in powered mixers

Date of Purchase

Dealer’s Name

City

State

Zip

Model #

Serial #

C O N T E N T S

F E AT U R E S

FEATURES ................................................................................2
WARNING ..................................................................................3
INSTALLATION ..........................................................................4
1. Inspection  ..............................................................................4
2. Setup and Operation  ............................................................4
CONTROLS AND CONNECTIONS ............................................5
1. Channel Section  ....................................................................5
2. Master Echo Effects Section  ................................................7
3. Master Control and EQ Section..............................................7
4. Master Input / Output Section ................................................8
5. Rear Panel ..............................................................................9
6. Connection Example ............................................................10
SPECIFICATIONS ....................................................................11
1. Input Section  ........................................................................11
2. Mixer Section  ......................................................................11
3. Output Section ......................................................................11
4. General ................................................................................11

• 16 Mono channels (6 channels for the PMX-600) plus 2 Aux

Returns and a stereo Tape In for a combined total of 20 inputs
(10 inputs for PMX-600) with full complement of input controls,
connections and indicators

• Power Output — 2 x 200W RMS @ 4 ohms (1% THD) with

both channels driven.  Advanced amplifier design features
include fan cooling, short circuit protection, current limiting,
speaker DC protection circuits, clip indicators for utmost safety
and reliability and power ON/OFF anti-thump circuit for quietest
operation

• Excellent audio with warm analog tone perfect for live or

recording applications

• Stereo L-R Master Mix and G1-2 Group Submix buses, with 4

master faders and submix to main enable switch

• Built-in 32-bit DSP Echo Effects emulates plate, gate, room,

hall, stadium reverbs and delays 

• 60 mm faders on all Channels, Groups 1-2, Main L-R, and

Effects

• Dual Master 7-band Graphic EQ 
• Each channel with balanced XLR Mic and 1/4” TRS line inputs,

Trim controls, Peak LED’s, Selectable Low Cut filters; Channel

High EQ, frequency sweepable Mid EQ, and Low EQ; Channel
Aux 1 and Aux 2-EFF Send controls, Pan controls, assignable
L-R and G1-2 switches, and channel faders

• Switchable 48V phantom power; 2 Aux Sends and 2

Aux Returns; Tape/CD In and Record Out stereo RCA jacks
with Tape level control; 10-segment LED display bargraph
meters with Power Amp peak indicator

• Outputs include balanced 1/4” TRS and XLR Main Stereo

outputs; balanced 1/4 “ Group 1 and 2 outputs; adjustable
Control Room left and right 1/4” outputs; and stereo
headphone output with separate volume adjust and L-R or G1-
2 selector; Left and Right dual 1/4” amplifier outputs for easy
speaker daisy-chaining

• Internal shielded AC supply with 115V(60Hz)/230V(50Hz) select

switch

• Dimensions & Weights: 

PMX-1600: (HWD) 6.4” x 28.7” x 17.2” (163 x 729 x 437mm);
35.25 lbs. (16 Kg)
PMX-600: (HWD) 6.4” x 16.9” x 17.2” (163 x 430 x 437mm);
24.5 lbs. (11.1 Kg)

Summary of Contents for PMX series













Reviews: