background image

401X Quad Receiver

• Four independent VHF receivers in one convenient, rugged, all-metal single rack space

housing – makes operating 4 wireless systems at the same time easier than ever

• Front-mount dual antenna jacks for either onboard or remote antennas

• Front panel Power ON/OFF switch, plus Power ON LED, TX ON and AF signal level

LED displays

• Rear panel individual XLR AF Output jacks, volume and RF mute controls for each of

the 4-channels, and 4-Channels-Mixed AF Out 1/4” phone jack

• Noise-free transmitter ON/OFF operation

• High performance – unmatched transparent audio with 120 dB dynamic range and up to

250+ feet optimum line-of-sight operation

WHT Handheld Microphone Transmitter

• Features the Nady DM -10D unidirectional neodymium dynamic cartridge for optimum

true sound, maximum feedback rejection and minimal handling noise

• OFF/STANDBY/ON switch allows convenient audio muting with the transmitter “ON”

• Low battery LED indicator flashes once for unit “ON”; lights steady for low battery alert

• Rubber, “easy-mount” mic clip included

WGT & WLT Bodypack Transmitters

• Choice of instrument (WGT-15) or headworn/lavalier microphone (WLT-15) bodypack

transmitter

• OFF/STANDBY/ON switch allows convenient audio muting with the transmitter “ON”

• Low battery LED indicator flashes once for unit “ON”; lights steady for low battery alert

• Locking 3.5mm mini-jack provides secure connection for removable microphone or

instrument cable

• Easily accessible input level adjust control for optimum sound

LINK 2™ Plug-In Transmitter

• Plug-in transmitter converts your favorite XLR handheld or lavalier microphone to

wireless instantly

• Rugged construction and positive locking connector for reliable performance

• Selectable phantom power and LO/HI audio input level

• Optional leatherette pouch with clip available for use as bodypack

S Y S T E M   F E A T U R E S

4

Summary of Contents for 401X Quad




















Reviews: