![background image](http://html2.mh-extra.com/html/nady-systems/401x-quad/401x-quad_user-manual_3113524014.webp)
14
The LINK 2
TM
Plug-In Transmitter
1. Transmitter Set-Up
First, slide open the
BATTERY COMPARTMENT DOOR (39)
to expose compartment.
Insert a fresh
9V ALKALINE BATTERY (41)
, observing polarity. Close the battery
compartment door.
2. Handheld Microphone Installation
•
Step 1 - Rotate the transmitter’s threaded
LOCKING RING (33)
clockwise toward
the
XLR CONNECTOR (32)
until it stops.
•
Step 2 - Hold your mic in one hand and The Link 2 in the other.
•
Step 3 - Plug your mic into the
XLR CONNECTOR
.
•
Step 4 - Lock the mic into place with the adjustable threaded
LOCKING RING
by
rotating the ring, counterclockwise, to the top of the transmitter.
•
Step 5 - To release the
XLR CONNECTOR
, turn the threaded
LOCKING RING
clockwise and press the
RELEASE BUTTON (40)
.
3. Lavalier Microphone Installation
The lavalier microphone you are using must terminate with an XLR connector and conform
to the pin assignments shown below. If they do not conform, you must use an appropriate
adapter or the lav mic may not work with the Link 2. If you have any questions, please
contact your Nady dealer or Nady Systems’ Customer Service Department.
Note: the pin assignments on The Link 2’s XLR connector are as shown:
Note: Select phantom power, as needed, with the PHANTOM POWER ON/OFF SWITCH (38)
O P E R A T I O N
14