Nadatel NCAM-370-X10, Network Manual

Page: 36 / 39

4
H.264 IP PTZ Camera Network Manual
36/39
3. Use FTP
While enabling FTP recording, “FTP upload by event” function is not available automatically
This feature is to record video data to specified folder of FTP server using standard FTP protocol. The type of
recorded file is ES stream of the H.264 video. The file name shows the date and time : “Date_Begin Time_End
Time.es”
Use record : To use FTP for recording, select “Use FTP”
FTP Base Directory: If FTP base directory is specified, folder is created and files will be recorded into the
folder.
Max file Size: Max File Size option is for limiting the size of AVI file. If small file size is set, files of small
size will be generated but numbers of the files will be increased. If recording time is more than 10 minutes,
new file will be created even though previous file size is smaller than set max file size.
Overwrite is not supported . This means video server (IP camera) will not erase any data written in the
FTP server.
Event Type
Three recording modes are supported in NCAM-370: Full-time , Event , Disconnect . In case of Event
recording, event types can be selected among several events. Selected event type is used for configuring
the schedule table. Up to 4 event types can be configured and each event type can be a combination of
sensor, video loss and motion event.
Pre-event Time: Specify the duration of recording before an event happens.
Post-event Time: Specify the duration after the event is cleared
Schedule Table
Actual recording mode is determined by Schedule Table , where recording mode configured by day (of a
week) and time.
Each of recording mode configures the recording operation as follows:
•
Record off : No recording
•
Continuous : Records continuously
•
Disconnect : Data is recorded when the system loses the connection to its client(Decoder, CMS/NVR) etc.
REMOTE CONFIGURATION
4