Nadatel NCAM-370-X10, Network Manual

Page: 22 / 39

4
H.264 IP PTZ Camera Network Manual
22/39
Input Foramt Choose video type to be used between composite NTSC or composite
Resolution Selectable video compression resolution:
NTSC: 720X480, 720x240, 352X480, 352X240, 176X120
PAL: 720X576, 720X288, 352X576, 352X288, 176X144
Frame rate Selectable video frame rate: Determine the maximum number of frames of video
images to compress. The frame rate of actually transmitted video can be affected by
the network bandwidth limitation
Preference Preference in video compression and transmission: With ‘Bit rate’ selected, the video
compression will be effected by the ‘Bit rate’ value entered. With ‘Quality’ selected, the
video compression will be effected by the quality of image selected. Therefore, ‘Bit rate’
and ‘Quality’ corresponds to CBR and VBR respectively
Quality The selection is possible with Preference is set to ‘Quality’
Bitrate The value is applicable when Preference is set to ‘Bit rate’
I-Frame Interval Possible values between 0 and 255. There will be no I-frames if 0 is selected.
H.264 Profile Select H.264 Profile: High Profile or Baseline Profile.The standard defines various sets
of capabilities, which are referred to as profiles, targeting specific classes of
applications.
- High Profile (HiP): The primary profile for broadcast and disc storage applications,
particularly for high-definition television applications (for example, this is the profile
adopted by the Blu-ray Disc storage format and the DVB HDTV broadcast service).
- Baseline Profile (BP) : Primarily for low-cost applications that require additional
data loss robustness, this profile is used in some videoconferencing and mobile
applications. This profile includes all features that are supported in the Constrained
Baseline Profile, plus three additional features that can be used for loss robustness
(or for other purposes such as low-delay multi-point video stream compositing).
Use Dual Encode The Selection between H.264 and MJPEG is supported. Secondary Video can be used
on Live View window.
Dual Compression
Algorithm
Select Secondary Video compression between H.264 and MJPEG. Maximum resolution
is 720 x 480. There are 8steps for adjusting. If MJPEG is selected, only Quality mode is
supported
Motion Detection
Area Editing
Configure regions for motion detection. Regions of arbitrary shape can be configured
by the following steps.
①
Enable Edit item.
②
Select editing Mode. Set is for including cells to motion detection region and
Erase is for excluding.
③
Select cells using the right button of the mouse. Multiple cells can be selected
conveniently by press and dragging.
④
Press Apply Edited Area to save the editing.
4
REMOTE CONFIGURATION