Nadatel NCAM-370-X10, Network Manual

Page: 27 / 39

4
H.264 IP PTZ Camera Network Manual
27/39
Flow Control
Mode
When several clients connect to a server, bandwidths of networks clients may differ and
some clients may not receive encoded stream fully. To handle such situation, three flow
control modes which can be chosen according to users’ preference are provided
Mode Description
Min The bitrate is automatically adjusted to a client with smallest
network bandwidth
Max The bitrate automatically adjusted to a client with largest network
bandwidth size. When set to this mode, a client with smaller
bandwidth will not receive all frames of video
Adjust The bitrate is adjusted to most optimum rate by learning the
network bandwidth
Off Flow control is off
Address Info Display network related information
IP Address The server own IP address. This information is useful when the
server’s IP mode is set to DHCP
Domain
Name
In case the server is registered with DDNS server, the registered
domain name is displayed
MAC
Address
Display the MAC address of the server. In case the server is
registered with DDNS server, the MAC address is used in DDNS
registration
Connecting Client IP Addresses that are currently connected to the camera
are listed.
REMOTE CONFIGURATION
4