4
H.264 IP PTZ Camera Network Manual
26/39
IP Mode
Three IP modes are supported. Depending on the selected mode, further configuration
items come as follows.
IP Mode
Selection
Description
Fixed IP
Local IP
Fixed IP address
Local Gateway
Gateway IP address
Local Subnet
Subnet mask
DHCP
N/A
☞
Please ask an IP address information from ISP provider or network manager
DNS
Set DNS server IP address
Base Port
Network base port use for communication between systems. In order for the servers
and remote systems to be connected together, the port number must be identically set
HTTP Port
HTTP port use for web-based connection
RTSP Port
RTSP port used for RTSP-based connection
RTSP
Authentication
Determine to use RTSP Authentication. If RTSP Authentication option is “On” on the
Network page, user should enter correct User ID and Password when any RTSP client
is connected
RTP session
RTP only streaming without RTSP connection is supported. SDP (Session Description
Protocol) file can be found in the server, and a client can retrieve it using http
connection. Network tab of web setup page provides related settings.
Set IP and port for your destination system which will receive RTP stream. User Name
will be used as session name in SDP file. File Name will be used as the name of the
SDP file. Then, it can be accessed through http://ServerAddress/filename.
SNMP
Setup for using SNMP (Simple Network Management Protocol)
SNMP Listen Port:
The port is for connecting external devices when system
operates as a SNMP client. SNMP is not used by setting 0 value.
SNMP Trap Destination IP
: Set the SNMP Trap Destination IP.
SNMP Trap Destination Port:
Set the SNMP Trap Destination Port. SNMP is not
used by setting 0 value.
Multicast IP
The multicast IP address selection range is between 224.0.1.0 and 238.255.255.255.
The selection can be used only when media protocol is set to Multicast. The multicast
address must be the same for the system to be connected using multicast protocol
DDNS
Select the DDNS(Dynamic DNS) server to use
Check IP Disable:
If “Check IP Disable” is selected, Camera will skip to check its
own IP. In Fixed IP mode, the set IP will be registered on DDNS server. In DHCP
mode, the Allotted IP will be registered on DDNS server.
REMOTE CONFIGURATION
4
Summary of Contents for NCAM-370-X10
Page 19: ...4 H 264 IP PTZ Camera Network Manual 19 39 System Configuration REMOTE CONFIGURATION 4 ...
Page 21: ...4 H 264 IP PTZ Camera Network Manual 21 39 Video Configuration REMOTE CONFIGURATION 4 ...
Page 25: ...4 H 264 IP PTZ Camera Network Manual 25 39 Network Configuration REMOTE CONFIGURATION 4 ...
