background image

 Page 12 

Cleaning Your Indoor Unit

 BEFORE CLEANING OR

 

 MAINTENANCE

ALWAYS TURN OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT ITS POWER SUPPLY
BEFORE CLEANING OR MAINTENANCE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 CAUTION

Only use a soft, dry cloth to wipe the unit clean. 

If the unit is especially dirty, you can use a cloth 

soaked in warm water to wipe it clean.

• 

Do not

 

use chemicals or chemically treated 

cloths to clean the unit

• 

Do not 

use benzene, paint thinner, 

polishing powder or other solvents to clean 

the unit. They can cause the plastic surface 

to crack or deform.

• 

Do not

 use water hotter than 40°C (104°F) 

to clean the front panel. This can cause the 

panel to deform or become discolored.

Cleaning Your Air Filter

A clogged air conditioner can reduce the cooling 

efficiency of your unit, and can also be bad for 

your health. Make sure to clean the filter once 

every two weeks.
1.  Lift the front panel of the indoor unit. 
2.  Grip the tab on the end of the filter, lift it

up,then   pull it towards yourself.

3.  Now pull the filter  out.
4.  If your filter has a small air freshening filter, 

unclip it from the larger filter. Clean this air 

freshening filter with a hand-held vacuum.

5.  Clean the large air filter with warm, soapy 

water. Be sure to use a mild detergent.

Care and Maintenance

3       

6. 

Rinse the filter with fresh water, then shake 

off excess water.

7. 

Dry it in a cool, dry place, and refrain from 

exposing it to direct sunlight.

8. 

When dry, re-clip the air freshening filter to 

the larger filter, then slide it back into the 

indoor unit.

9. 

Close the front panel of the indoor unit.

 CAUTION

Do not touch air freshening (Plasma) filter for 

at least 10 minutes after turning off the unit.

Ca

re and 

Maintenance

Filter Tabs

Remove air freshening 

f

ilter from back of 

larger filter (some units)

Summary of Contents for MS12KC110VG





















Reviews: