GM Series
TM19040 P.6/31
C
C
h
h
a
a
p
p
t
t
e
e
r
r
1
1
S
S
A
A
F
F
E
E
T
T
Y
Y
The safety precautions are to be guidelines to avoid human accidents during the transportation, installation,
and maintenance of GM, as well as to avoid damage to GM.
1.1. Strict observance and Prohibition
Overall precautions are classified into strict observance and prohibition.
For precautions at installation and maintenance, be sure to refer to the description of the corresponding
chapter.
z
Strict observance
•
The transportation, installation, and maintenance should be performed only by personnel who
understand the manual.
•
The tools required for the work should be cleaned up to a specified place after work. Mixing a foreign
object such as tools, screws and/or nuts may cause damage to the product.
•
For handling of the hydraulic oil and the lubricant, refer to the indications and recommendations in this
manual.
z
Prohibition
•
The work coordinator and/or administrator should not let personnel who have no ample knowledge of
the product. It may result in an injury to the operator or damage to the product.
•
Do not put fingers or any foreign object at the opening end of the product. It may result in serious or
moderate injury.
•
Do not modify or disassemble the product. It may result in breakage of the product.
•
Do not apply excessive impact or vibration to the product. It may cause breakage of the product.
•
The product may be very hot during operation. After the operation, do not touch the product until it has
cooled down. Otherwise it may result in a heat-related injury.
•
Do not put any inflammable object around the product. It may result in fire.
•
If any abnormality or breakage should occur in the product, do not operate it until a proper
countermeasure is prepared.
