32 of 53
GT1175 (H105 Medium) Hurricane Quick Set-Up and Parts Guide
www.NabcoEntrances.com
P/N C-00106
Rev 8-10-16
Rocker Switch Settings (When wires M0 and M1 are switched to Red 7 the state is indicated by “ON”
Mode
Wire
M0
Wire
M1
Wire
H
Description
Two Way
Mode
OFF
OFF
-
Both Sensors on Terminals 3 and 8 and the Holding Beam* on Terminal 4 will receive signals
while the door is closed or cycling.
Hold Open
Mode
ON
ON
-
No activation needed. Door is held open.
Reduced-Open
Mode
-
-
ON Door will go to the reduced opening position upon activation.
One-Way
Traffic Mode
ON
OFF
-
● Only the Sensor on Terminal 3 will receive signals while the door is closed.
● The Sensor on Terminal 8 and the Holding Beam on Terminal 4 will be ignored while the door
is closed.
● During the door cycle both the Sensors and the Holding Beam will receive signals.
● The electric lock will be active to prevent exterior entry.
Night Traffic
Mode
OFF
ON
-
● No Sensor on Terminals 3 or 8 or the Holding Beam on Terminal 4 will receive signals while
the door is closed.
● Activation is only accomplished by switching M0 to Red (7).
● During the door cycle both the sensors and the Holding Beam will receive signals. The
electric lock remains locked except for activations from wall plates or card readers.