background image

 

 

responsibility which because of violation of safety operation or violating of 
design, production, and equipment safety standards. 

 

2.

 

Introduction 

N1C.L4850EBM2U, N1C.L48100EBM3U Lithium iron phosphate battery 
modules are new energy storage products. It is designed to integrate with 
reliable power modules such as UPS, solar inverter, and so on. 

Both N1C.L4850EBM2U, N1C.L48100EBM3U are built-in smart BMS battery 
management system, which can manage and monitor cells’ information 
including voltage, temperature, current, etc. Moreover, BMS can balance 
cells charging and discharging to extend cycle life. These two battery 
modules can be used alone or in parallel, to expand capacity for different 
requirements. 

2.1  Features 

 

Non-Toxic, non-polluting, and friendly to the environment. 

 

LiFeO4 cell material, safety performance, and long cycle life. 

 

Smart BMS protection functions: over-discharge, high temperature, 
over-charge, over-current. 

 

Flexible configuration, multiple battery modules can be operating in 
parallel for expanding capacity and power. 

 

Working temperature range is from 0°C to 50°C with excellent 
discharge performance and cycle life. 

 

Small size and lightweight: up to the standard of the 19-inch embedded 
designed module are comfortable for installation and maintenance. 
 

 

Summary of Contents for LR Series





















Reviews: