N.KO B2 Air, Manual

Page: 6 / 15

6
Personal Protection Preventing Injury
Use protective glasses while working, firm work footwear, protect hearing, suitable head
cover, respectively a protective helmet.
 Connect machine to pressurized air lines only in the case that the release valve of the
machine is in the off position.
 Before each use, check whether the equipment or the pressurized air input is damaged.
Don´t use machine in the case it is damaged in any way.
 Protect the machine from humidity and don´t use in a damp environment.
 Ensure good lighting at the worksite so as to prevent risk of possible injury or damage
to sight.
 Caution, the machine (milling cutter) is sharp, with a risk of the danger of injury. When
replacing, use protective gloves, never touch the milling cutter when it is in
motion.
 The material machined must always be firmly attached and in a horizontal position.
The optimal height of a workpiece is 900mm above the ground.
 Watch the intake hose while working; it should always freely lay on the floor away from
the material being worked on, or other sharp objects.

After finishing work, disconnect the equipment from the input of pressurized air.
 Don´t overload the motor of the machine. The machine works best when it isn´t
overloaded.
 Hold the equipment firmly in hand - palm while working.

Beware of danger from injury by hot metal shavings.
Important:
In case of damage, have the machine repaired at a service center which is authorized to
perform such repairs. Contact your supplier for more information.