12
Use of the extension cable (optional)
In case of need, it is possible to use the Extension Cable included in the
package to make the connection via cable to the motorcycle easier, moving
forward the micro USB connector on the left side of the helmet.
Fig. 6
Remove the protective film and
apply the plastic clip on the
helmet shell gasket, on the left
side. Position the clip as shown
in Fig. 6.
Note: It takes up to 24 hours for the
adhesive
to
stick
completely.
During this time, do not expose the
helmet to atmospheric agents.
Fig. 7
Connect the Extension Cable to
the micro USB connector of the
helmet. Fix the Extension Cable
inside the clip. Connect the
Extension
Cable
to
the
motorcycle connection cable.
