9
3.
INSTALLATION
Bluetooth Kit3 PLUS can be installed on all Nolan helmets pre-set for the N-Com
system.
In order to use the N-Com Bluetooth Kit3 PLUS system, the Nolan helmet
must be equipped with the Basic Kit2 (or Basic Kit), sold separately.
Note: Before using the N-Com Bluetooth Kit3 PLUS system, the battery must be
installed and recharged (see instructions for Basic Kit).
Install the Basic Kit2 (or Basic Kit) on the helmet, according to the specific
instructions.
Fig. 1
Fig. 2
Remove the N-Com protection plate from the helmet (Fig. 1).
The new Bluetooth Kit3 PLUS system is equipped with its own gasket that protects
against water seepage. Remove the gasket in case you have previously applied it on
the helmet (Fig. 2).
Position the e-box in the relevant housing. First insert the front part, then press
down on the e-box until both hooks fully click. To remove the e-box, press the two
sliding hooks at the same time until the e-box comes out.
Warning: Do not leave the helmet exposed to atmospheric agents without the e-box
or the protection plate provided with the helmet.
