N-Com bluetooth kit multi Instructions For Use Manual Download Page 25 | Manualshive

Page: 25 / 40

background image

25

8.

SATELLITE NAVIGATORS

Nolan’s N-Com communication system is compatible with the most popular
satellite navigators for motorcycles. Connection with a satellite navigator
can occur via cable (through the special Multimedia Wire) or via Bluetooth.

For connection via Bluetooth, affiliate the GPS device with the Bluetooth kit
MULTI by following the same procedure as for Bluetooth cell phones (see
chapter 5.1). Then connect the navigator to the Bluetooth kit MULTI.

9.

CONNECTION TO OTHER AUDIO PERIPHERALS

The  N-Com  Bluetooth  kit  MULTI system  is pre-set  to  allow  you  to  listen to
different audio devices, to be connected by means of the specific Multimedia
Wire (sold separately).
You can listen to an MP3 device or an FM radio. You can also connect to a
satellite navigation system, to the audio system of your own motorcycle or
to a radio for communication between two motorcycles.

The  N-Com  Bluetooth  Kit  MULTI  system  can  fit  cables  from  the  N-Com
range,  both  the  Mono  (Multimedia  Wire)  and  Stereo  (Multimedia  Wire2)
type.

The Bluetooth Kit MULTI is pre-set for Stereo type cables. In order to use a
Mono cable, you have to connect this cable prior to turning on the system.

In  the  event  that Mono  cables  (Mobile wire  or Multimedia wire)  are always
used, you can pre-set the system so that it always works with mono cables

«
...
23
24
25
26
27
...
»

Summary of Contents for bluetooth kit multi









































Reviews:

No comments

Related manuals for bluetooth kit multi

Brand: PACH & COMPANY Pages: 4

Brand: AddPac Pages: 269

Brand: B&B Molders Pages: 18

Brand: Parklio Pages: 12

Brand: DAEWOO ELECTRONICS Pages: 34

Brand: EMC-PARTNER Pages: 28

Brand: AbleNet Pages: 8

Brand: Sharp Pages: 18

Brand: AudioBahn Pages: 14

Brand: Sony Pages: 2

Brand: Sony Pages: 112

Brand: Sanyo Pages: 12

Brand: Sanyo Pages: 12

Brand: Sanyo Pages: 16

Brand: Sanyo Pages: 12

Brand: Sanyo Pages: 18

Brand: Sanyo Pages: 16

Brand: Sanyo Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands