23
Switching the
microphones on/off
(Mute function)
Press the “
” button and keep it pressed for
about 4 seconds.
7.
BLUETOOTH RECEIVER (A2DP PROFILE)
You can listen to high-quality music by connecting the Bluetooth kit MULTI
via Bluetooth to a receiver equipped with Bluetooth A2DP (Advanced
Audio Distribution Profile) protocol.
7.1.
Affiliation with A2DP devices
In order to affiliate a device equipped with Bluetooth A2DP protocol, proceed
as for the affiliation of a cell phone (Chapter 5.1). In case a code is required,
enter “0000”.
N.B.
:
If a telephone equipped with receiver with Bluetooth A2DP profile has
already been affiliated, you do not have to repeat the affiliation since
the A2DP protocol was already stored during the cell phone affiliation
procedure. When you first use it, the telephone must be connected and
the receiver started from the cell phone so that the system can
recognize it.
7.2.
Operation with A2DP receiver
When you first use it, connect the receiver (previously affiliated) according
to the method provided for the receiver and start audio reproduction.
Afterwards, it will be possible to establish the connection and start audio
reproduction directly from the Bluetooth kit MULTI (for receivers that allow
it).
Warning: The N-Com Bluetooth kit MULTI system is equipped with the
Bluetooth AVRCP (Audio Video Remote Control Profile) protocol, which is
Summary of Contents for bluetooth kit multi
Page 1: ...EN SAFETY AND INSTRUCTIONS FOR USE ...
Page 37: ...37 ...
Page 38: ...38 ...
Page 40: ...Printed on recycled paper Bluetooth Kit MULTI 01 06 2016 16 40 00 ...