N-Com bluetooth kit multi, Instructions For Use Manual

Page: 17 / 40

17
5.1. Affiliation with a Bluetooth telephone (or other Bluetooth
devices)
In order for two Bluetooth devices to communicate with each other, they
must be affiliated, in other words they have to be introduced to one another.
The N-Com system is recognized by the cell phone as a Bluetooth earpiece.
Please refer to your cell phone manual, the section on affiliation of Bluetooth
devices, in order to verify the affiliation procedure as it changes depending
on the specific model used.
After identifying your cell phone’s affiliation procedure, perform the
affiliation with Bluetooth kit MULTI.
1. Make sure that Bluetooth Kit MULTI is turned off;
2. Press the middle button “on”. After the first 4 seconds, the system turns
on. Keep this button pressed for an additional 4 seconds until the LEDs
start to flash quickly and a sharp beep is heard, indicating the affiliation
mode;
3. While the helmet is in affiliation mode, search for the Bluetooth devices
according to the procedure specific for your cell phone;
4. The name “N-Com 2.xx”, followed by the manufacturer’s identification
data, will be displayed on the cell phone, in the list of available devices;
5. Select the N-Com device;
6. When the cell phone asks for a password, enter the code 0000 (four
zeros);
7. The helmet will confirm that affiliation has taken place with a beep, and
the LEDs will stop flashing;