N-Com B901, User Instructions

Page: 19 / 32

19
8. MANAGING TWO MOBILE PHONES (OR BLUETOOTH DEVICES)
The B901 system can be hooked up to two phones (or Bluetooth) devices at the same time.
The second phone (secondary device) can receive calls but not make them.
To pair up the second Bluetooth phone (secondary device):
 Make sure the B901 is turned off;
 Put the system in the “Configuration” menu: press the “ ON ” key and keep it pressed for 4
seconds, until you hear the voice announcement “
Configuration
”;

Press the pushbutton “

” until you reach the option “ Second mobile phone pairing ”.

Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device;
 Select the N-Com system from the list. If a password is requested, enter the code 0000
(four zeroes);

After a few seconds, the connection between the two devices is activated.
Once the Bluetooth device has been paired up, connection is automatic when the system is turned
on.
9. MUSIC VIA BLUETOOTH
To pair up an Mp3 device to the B901 system, follow the procedure illustrated in Chapter 6.
Play music (Play) Briefly press “ ON ”.
Pause function (Pause)
When the player is connected and playing music, briefly press
“
ON ”.
Next track (Skip) When the player is playing music, press “

” for 2 about seconds.
Previous track (Rew) When the player is playing music, press “

” for 2 about seconds.
9.1. Sharing music via Bluetooth ( A2DP Sharing )
During the intercom connection, you can start playing music by briefly pressing the “ ON ” key. The
music will be played in both systems.
Music sharing temporarily cuts off the intercom conversation; however, this can be automatically
restored by stopping the music (this is done by briefly pressing the “
ON ” key).
N.B. : Music shared through the intercom can be managed by both systems, for example, both
systems can change the track by pressing the relative command.
N.B. : the “Music Sharing” function can only be used with the N-Com series “900”.
10. MUSIC VIA CABLE
Connect the mini USB connector of the Multimedia Wire (not included) to the helmet and the other
end to the audio device. A coloured band on the cable indicates the connector to be hooked up to
the audio device.
Turning on the cable audio Press the “ ON ” key three times.
Turning off the cable audio Press the “ ON ” key three times.