10
4.
BASIC FUNCTIONS
All N-Com system functions are available through the operation of three pushbuttons: “
”, “on” and “
”. Every time the system is given a command, a special acoustic signal can
be heard, which varies depending on the function being requested. This way, all the
functions can be used while wearing the helmet.
The type of command given to the system depends on how long the pushbutton is pressed.
System ON
Press “on” and keep it pressed for about 2 seconds, until the
LEDs turn on and you hear a beep in the headset.
System OFF
Press “on” and keep it pressed for about 5 seconds, until the
LEDs turn off and you hear a beep in the headset.
Increase Volume
Briefly press “
” to increase the volume. A double tone signals
the highest volume level.
Decrease Volume
Briefly press “
” to decrease the volume. A double tone signals
the lowest volume level.
4.1.
System menu
B4 features a menu with 3 functions: BASE, RADIO, BIKE TO BIKE (activated upon
request).
To scroll the card functions menu, press “on” for 2 seconds (with system turned on).
A special acoustic beep signals the change from one function to another.
When B4 is turned on, the menu is always in the “BASE” mode. Depending on the menu
position, you can manage the various audio devices and the available functions:
Menu
Functions
Base
Management of an external source connected via cable
Use of Mobile phone/GPS with Bluetooth connection
Use of the intercom “Rider–Pillion Passenger”
Listening to and management of Bluetooth A2DP player
Radio
Listening to and management of FM Radio
Use of Mobile phone/GPS with Bluetooth connection
Use of the intercom “Rider–Pillion Passenger”
Bike to
Bike
Use of the intercom “Bike to Bike”
Functions concerning Bluetooth mobile phone management are available in all menu
positions.
Note: The “Bike-to-Bike” menu must be specifically activated from the system (see
chapter 13) or by using the N-Com Wizard programme.
