E N G LI S H F R A N Ç A I S
Hardware Setup
MOVING THE BIKE
This product must be set up and operated
on a solid level surface. If your bike is not level, adjust
the four leveling feet located on the underside of the
front and rear legs (see figure 4) until all four feet are
evenly contacting the floor.
Use two people to move the product, since it
weighs over 150 lbs (68 kgs). Remove the tablet
(see page 9) when moving the bike to help protect it
from damage.
1. Have one person lift the rear stabilizer to tilt the bike
forward onto the transport wheels, while the other
person holds the handlebars.
2. Roll the bike forward to the new location.
3. Lower the rear stabilizer to the floor.
4. Unscrew leveling feet if needed to prevent rocking
on uneven floors.
1
2
3
4
