background image

                                 
                                   

MyTek                                

MWA-105 Access Point 

                                                  Communication Ltd.

 

 

                         

Version: 1.1

 

 

 

 

1 Introduction 

The MWA-105 Wireless LAN Access Point is an affordable IEEE 802.11b/g wireless LAN Access Point 

solution; setting SOHO and enterprise standard for high performance, secure, manageable and reliable 

WLAN. 

 

This document describes the steps required for the initial IP address assign and other WLAN router 

configuration. The description includes the implementation of the above steps. 

 

1.1 Package  contents 

The package of the WLAN Access Point includes the following items, 

The WLAN Access Point 

The AC to DC power adapter 

The Documentation CD 

 

 

1.2 Product  Specifications 

Product Name 

MWA-105 WLAN Access Point 

Standard 

802.11b/g(Wireless), 802.3(10BaseT), 802.3u(100BaseT) 

Data Transfer Rate 

54Mbps(Wireless), 100Mbps(Ethernet) 

Modulation Method 

CCK(802.11b), OFDM(802.11g) 

Frequency Band 

2.4GHz – 2.497GJz ISM Band, DSSS 

RF Output Power 

CCK< 17 dBm, OFDM< 13.5 dBm 

Receiver Sensitivity 

802.11b -80 dBm@8%, 802.11g -68 dBm@5% 

Operation Range 

30 to 280 meters (depend on surrounding) 

Antenna External 

Antenna 

LED Power, 

Active 

(WLAN/Ethernet) 

Security 

64 bit/ 128 bit WEP, WPA, WPA2 

LAN interface 

One 10/100BaseT with RJ45 connector 

Power Consumption 

7.5V DC Power Adapter 

Operating Temperature 

0 ~ 50

o

C ambient temperature 

Storage Temperature 

-20 ~ 70

o

C ambient temperature 

Humidity 

5 to 90 % maximum (non-condensing) 

Dimension 

118 x 75 x 25 mm 

 

 

MyTek Communication Ltd.                                                 Tel:  (36-1) 347-0446, (36-1) 280-9397 
Vörösmarty utca 79. Budapest                                                               Fax: (36-1) 347-0447 
Hungary H-1201            

                                                            http://www.mytek.eu

 

 

 

1

 

Summary of Contents for MWA-105























































Reviews: