MyTek
MWA-105 Access Point
Communication Ltd.
Version: 1.1
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like the
Ethernet does. To do this, you must set these APs in the same channel and set MAC address
of other AP that you want to communicate with in the table and then enable the WDS.
Screen snapshot – WDS Setup
Item
Description
Enable WDS
Click the check box to enable wireless distribution
system. Refer to 4.21 What is Wireless Distribution
System (WDS)?
MAC Address
Fill in the MAC address of AP to register the wireless
distribution system access capability.
Comment
Fill in the comment tag for the registered AP.
Apply Changes
Click the
Apply Changes
button to register the AP to new
configuration setting.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
MyTek Communication Ltd. Tel: (36-1) 347-0446, (36-1) 280-9397
Vörösmarty utca 79. Budapest Fax: (36-1) 347-0447
Hungary H-1201
http://www.mytek.eu
23
