manualshive.com logo in svg

MyTek MWA-105, User Manual

Share
Download
MyTek MWA-105 User Manual Download Page 21

                                 
                                   

MyTek                                

MWA-105 Access Point 

                                                  Communication Ltd.

 

 

                         

Version: 1.1

 

 

 

 

 

3.3.3 Operation Mode 

This page is used to configure which mode wireless broadband router acts 

Screen snapshot – Operation Mode 

 

Item 

Description 

 

 

Bridge 

Each interface (LAN, WAN and Wireless) regards as 

bridge. NAT, Firewall and all router’s functions are not 

supported 

Wireless ISP 

Switch Wireless interface to WAN port and all Ethernet 

ports in bridge mode. Wireless interface can do all 

router’s functions 

Apply Changes 

Click the 

Apply Changes

 button to complete the new 

configuration setting. 

Reset Click 

the 

Reset 

button to abort change and recover the 

previous configuration setting. 

 

 

3.3.4  Wireless - Basic Settings 

This page is used to configure the parameters for wireless LAN clients that may connect to 

your Access Point. Here you may change wireless encryption settings as well as wireless 

network parameters. 

 

 

MyTek Communication Ltd.                                                 Tel:  (36-1) 347-0446, (36-1) 280-9397 
Vörösmarty utca 79. Budapest                                                               Fax: (36-1) 347-0447 
Hungary H-1201            

                                                            http://www.mytek.eu

 

 

 

14

 

Summary of Contents for MWA-105























































Reviews:

No comments

Brands by name

Popular brands

Load more brands