MyTek MWA-105 User Manual Download Page 36

Page: 36 / 54

MyTek

MWA-105 Access Point

Communication Ltd.

Version: 1.1

Screen snapshot – WAN Interface Setup – Static IP

Item

Description

Static IP

Click to select Static IP support on WAN interface. There

are IP address, subnet mask and default gateway settings

need to be done.

IP Address

If you select the Static IP support on WAN interface, fill

in the IP address for it.

Subnet Mask

If you select the Static IP support on WAN interface, fill

in the subnet mask for it.

Default Gateway

If you select the Static IP support on WAN interface, fill

in the default gateway for WAN interface out going data

packets.

MTU Size

Fill in the mtu size of MTU Size. The default value is

1400

DNS 1

Fill in the IP address of Domain Name Server 1.

DNS 2

Fill in the IP address of Domain Name Server 2.

DNS 3

Fill in the IP address of Domain Name Server 3.

Clone MAC Address

Fill in the MAC address that is the MAC address to be

cloned. Refer to 4.24 What is Clone MAC Address?

Enable Ping Access on

WAN

Click the checkbox to enable WAN ICMP response

Enable Web Server

Access on WAN

Click the checkbox to enable web configuration from

WAN side.

Enable IPsec pass

through on VPN

connection

Click the checkbox to enable IPSec packet pass through

Enable PPTP pass

through on VPN

connection

Click the checkbox to enable PPTP packet pass through

Enable L2TP pass

through on VPN

connection

Click the checkbox to enable L2TP packet pass through

Set TTL value

Click to Enable and Set Time to Live value

Apply Changes

Click the

Apply Changes

button to complete the new

MyTek Communication Ltd. Tel: (36-1) 347-0446, (36-1) 280-9397
Vörösmarty utca 79. Budapest Fax: (36-1) 347-0447
Hungary H-1201

http://www.mytek.eu

Summary of Contents for MWA-105























































Search results

Summary of Contents for MWA-105

Reviews:

Brands by name

Popular brands

MyTek MWA-105, User Manual

Search results

Summary of Contents for MWA-105

Reviews:

Brands by name

Popular brands