MyndStep 800102 User Manual Download Page 19

Page: 19 / 88

before you remove the unit or the electrodes. If you do not end the treatment, you may experience

an unpleasant sensation in your fingers. This sensation is not harmful but can be unpleasant.

⚫

Handle the unit with care. Do not drop, knock, or shake the unit. Rough handling can damage internal

circuit boards.

⚫

Use this device only with the charger, cables, electrodes, and accessories recommended by the
manufacturer.

⚫

Some patients may experience skin irritation or hypersensitivity due to the electrical stimulation or
electrically conductive medium (gel).

⚫

Always disconnect the power charger from the mains after use.

⚫

Please charge the unit at least every three months during long-term storage.

⚫

Federal law restricts this device to sale by a practitioner licensed by the law of the State.

⚫

Due to a mobile phone system upgrade or cyber-security upgrade, we will update MyndStep

Application in time. If the MyndStep Application fails due to a mobile phone system upgrade or other

reasons, you can download the latest version of the application from the APP store. Please contact

MyndTec Inc. for help if the problem still exists

Summary of Contents for 800102

























































































Search results

Summary of Contents for 800102

Reviews:

Related manuals for 800102

Brands by name

Popular brands

MyndStep 800102, User Manual

Search results

Summary of Contents for 800102

Reviews:

Related manuals for 800102

Brands by name

Popular brands