28
10.3. Using HDMI devices
Your device has a micro HDMI connector that you can use to connect an external display to provide
video output.
First, connect a micro HDMI cable to your device then plug the other end of the HDMI cable into a
HDMI port on your TV or monitor. Usually, your device works well with most of the HDMI monitors,
and the HDMI device shows exactly the same as you see on your device’s screen.
However, there is a possibility that there may still be issues as per the following:
• Unmatched in resolution or aspect ratio
» Tap the option Modes
» Scroll down to select a proper resolution setting
• Unmatched in scale
» Tap the option Scale Modes
» Select your desired mode from the list
• Overscan (Edges of your image are off the HDMI screen)
» Tap the option Overscan Compensation
» Tap to select Horizontal/Vertical.
» Press the zoom in/zoom out buttons to scale up/down your image in
Horizontal/Vertical direction.
10.4. Using micro-SD cards
Your device supports micro-SD cards and you can insert your micro SD card and pull it out
without powering down the device. To do so, follow the steps
Insert the micro SD card as shown below..
Install your Micro SD Card
• Hold your
device with front side up.
• Insert your micro SD card in the direction as shown above.
Remove your Micro SD Card
• Push and release the micro SD card. This will unlock the card.
• Pull out the micro SD card.
All manuals and user guides at all-guides.com